ОБЗОР
Europump
Products of Europump Consulting are presented by the following pumps:
- Vertical / horizontal multistage pumps
- Submersible wastewater pumps
- Drainage and sludge pumps
СПЕЦИАЛЬНОЕ ИСПОЛНЕНИЕ
Europump
Vertical multistage pumps
SB-series are professional multistage pumps for industrial applications. Depending of the media, the pumps comes in three different material combinations; pump volute and flanges in cast iron and impellers in AISI304 (type SB), complete pump and connections (flange or Victaulic) in stainless steel AISI304 (type SBI) and the fully stainless steel version in AISI316 (type SBN).
All material combinations can be equipped with an integrated variable speed drive and pump control to the motor (type SB(I/N)E.
The SB, SBI and SBN pumps are non-self-priming vertical multistage pump of in-line design, flange or with Victaulic coupling with equally sized suction and discharge ports. Stage construction with stainless steel impellers, chambers and pressure casing. Pump stub shaft and motor shaft of the IEC-standards motor are directly close coupled. All pumps are equipped with a cartridge type mechanical seal for easy maintenance.
SB, SBI and SBN pumps have different pump sizes and various numbers of stages to provide the flow and the pressure required.
Data:
- Max pressure: 50 bar
- Max capacity: 210 m3/h
Applications
- Water supply and pressure boosting
- Irrigation and agriculture
- Irrigation and agriculture
- Water treatment
- Heating, ventilation and air-conditioning
Horizontal multistage pumps
<
We offer a wide range of state of the Horizontal multistage pumps, complete in stainless steel AISI304 or AISI316.
CB pumps
The CB and CBI series are non-self priming, horizontal multistage centrifugal pumps. Pump is coupled with motor at the same shaft and mounted on a base-plate. The friendly design makes the pump suitable for installation in the small domestic or industrial water supply systems. The pump is fitted with a mechanical seal and through-going pump-motor shaft.
Data:
- Max pressure: 7,5 bar
- Max capacity: 16 m3/h
HB pumps
A horizontal, multistage centrifugal pump is made of stainless steel. The pump is a non-self priming type and fitted with a mechanical shaft seal.
Data:
- Max pressure: 7 bar
- Max capacity: 15 m3/h
Applications
- Domestic
- Liquid transfer and circulation of liquids within light industry and farming
- Pressure boosting
- Air-conditioning systems
- Cooling systems or cooling machine
- Specialized OEM equipment
Submersible wastewater pumps
SP-series are a professional range of submersible well pumps in full stainless steel AISI304 or AISI316. It is used World Wide
by many accredited companies within water supply, groundwater control, wellpoints and drilling applications.
Our submersible motors are waterfilled and first class quality only. They are attached by NEMA flange standards to the pump and can easily retrofit other pumphead brands.
Data:
- Range: 3” – 10”
- Max pressure: 60 bar
- Max capacity: 220 m3/h
Features:
- Vortex & Channel impellers
- Submersible motors with/without cooling jacket
- Motors from 0,5 - 50 kW
- Capacities up to 300 l/sec.
- Head to 85 meters
- Solids pasing up to 135 mm
- Standard Burgmann seals
- Stainless lifting hook
- Cast iron or stainless steel executions
Drainage & Sludge Pumps
Features:
- Sludge pumps suitable for waste water
- Drainage pumps suitable for sand / abrasive liquids
- Built-in vent valves enable permenent dry run
- Hose connections via stortz or thread
- Motor sizes from 0,3 to 60 kW
- Capacities up to 300 l/sec.
- Heads to 120 m
- Solids passing up to 80 mm
- Low weight
- Accessories e.g. Firehose, couplings
- Built-in level controls
Latviski 
Pусский 
World of tapflo
