BROŠŪRAS, INSTRUKCIJAS

Higiēniskie vārpsti

 

BUTTERFLY VALVE (DELTA SV/SVS, 100 SERIES)

The valve is a simple butterfly valve, which can be delivered with a manual handle or pneumatic actuator. The butterfly valve is the simplest valve consisting of two flanges.

Sealing material: EPDM, HNBR, FPM, VMQ, PTFE
Size: DN25 - 100 and 1” - 4”; DN25 - 250 and 1” - 4”
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

SINGLE-SEAT VALVE (DELTA SW4, 801 SERIES)

A standard single-seat valve available in on/off, changeover, and tank-outlet versions. Many options available e.g. stroke limiter, oil dampen-ing cylinder, steam barrier etc.

Sealing material: EPDM, HNBR, VMQ, FPM, HNBR
Size: DN10-150 1/2” - 6”
Max. line pressure: 10 bar (145 psi) (DN10 - 20: 5 bar) (72 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

DOUOBLE SEAT MIXPROOF VALVE (DELTA DA3+, DE3, DA4, 900 SERIES)

The valve has two valve stems and two valve seats for ultimate separation of two products. The seat lifting function and separate spraying of the leakage chamber ensures a complete and reliable cleaning.

Sealing material: EPDM/PTFE, HNBR/PTFE, FPM/PTFE, SILI-CON/PTFE
Size: DN25 - 150 1.5” - 4” and 6
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

MIXPROOF BALL VALVE (DELTA DKR)

A ball valve with two seat seals to ensure timely discovery of leakages. The throughflow openings are absolutely smooth and correspond to the pipe diameter.

Sealing material: EPDM/PTFE, FPM/PTFE, HNBR/PTFE, VMQ/PTFE
Size: DN25 - 125 1” - 4”
Max. line pressure: DKR: 10 bar (145 psi) DKRH: 100 bar (1450 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

SINGLE SEAT DOUBLE SEAL MIXPROOF VALVE (DELTA SD4/SDM4, 870 SERIES)

Single Seat Double Seal valves are used in automated piping systems where product mixing from pressure hammer or seat failure is a concern. SSDS valve is designed for safe media separation in hygienic process applications.

Sealing material: EPDM, HNBR, TFM diaphragm
Size: DELTA SD4: DN25-100 and 1” - 4”
DELTA SDM4: DN40-65 and 1.5” - 2.5”
Max. line pressure: DELTA SD4: 10 bar (145 psi) DELTA SDM4: 5 bar (72 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

BUTTERFLY MIXPROOF VALVE (DELTA DSV, 100 SERIES - BLOCK & BLEED)

The valve combines all the advantages of the simplicity of a butterfly valve with sophisticated mixproof technology

Sealing material: EPDM, HNBR, FPM, VMQ, PTFE
Size: DN50 - 125 3”; EPDM, HNBR
Max. line pressure: DN50 - 65: 5 bar (72 psi) DN80 - 125: 6 bar (87 psi)
Min. control air pressure: 10 bar (145 psi); (DN125: 6 bar) (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

ASEPTIC SINGE SEAT VALVE (DELTA MS4/MSP4)

An aseptic single seat valves are designed for aseptic applications in the food, beverage, dairy, pharmaceutical and chemical industries. The valves are available in shutoff or change-over design as well as for manifold or tank outlet applications.

Sealing material: EPDM, HNBR, FPM, VMQ
Size: DN25, DN40, DN50, DN65, DN80, DN100 1”, 1.5”, 2”, 2.5”, 3”, 4”
Max. line pressure: 10 bar (140 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

ASEPTIC VALVE (DELTA AP1)

A diaphragm valve range offers optimum protection of the product in aseptic applications. Product safety is provided by the hermetic separation of the product chamber from the environment (atmosphere) by a flexible diaphragm shaft. The function of the valve is to shut off line sections or aseptic tanks.

Diaphragm material: PTFE TFM 1705 (FDA 21CRF177.1550, USP Class VI)
Size: DN10, DN15, DN20 ½”
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F), short-term SIP 150 °C)
Valves
 

REGULATING VALVE (DELTA RG4)

The valve is designed for continuous flow control. It is equipped with a diaphragm actuator and positioner

Sealing material: EPDM, FPM, HNBR, VMQ
Size: DN25-150 1” - 4”; PN 25 - DN25 - 65; PN 16 - DN80 - 100;
PN 10 - DN125 - 150
Max. line pressure: 16 bar (232 psi)
Min. control air pressure: 4 bar (58 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

PLUG VALVE (11 SERIES)

The plug valve consists of a valve body, plug and cover made from quality stainless steel. The plug is coated with a hard chrome coating followed by precision grinding and lapping to ensure leak proof and easy operations.

Sealing material: vAISI 316L or AISI 304L
Size: 1”, 1 ½”, 2”, 2 ½”, 3”, 4”; DN25,DN40,DN50,DN65,DN80,DN100
Max. line pressure: 4 bar
Sterilisation temperature: 135°C (284°F)
Valves
 

CONSTANT PRESSURE VALVE (DELTA CPV)

To keep a constant pressure, the free flow sec-tion at the valve seat is reduced or enlarged by the valve cone. Via the valve shaft, the cone is connected to a regulating membrane, which will be backed up with air at a set pressure.

Size: DN25 - 50 2”
Max. line pressure: 6 bar (87 psi)
Min. control air pressure: 7 bar (101 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

SAFETY VALVE (DELTA SI2)

To protect vessels and piping systems from over pressure. The standard valve comes with pneumatic seat lift actuator.

Sealing material: EPDM, HNBR, VMQ, FPM
Size: DN25 - 100
Max. line pressure: 10 bar (140 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

PRESSURE RELIEF VALVE (DELTA UF/UFR, 70 SERIES)

Pressure relief valve is designed to protect installations against excess pressure. If the set pressure is exceeded, the valve opens. Equipped with seat lifting actuator for opening during line cleaning.

Sealing material: EPDM, HNBR, VMQ, FPM
Size: DN25 - 100 1” - 4”
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

SAMPLING VALVE (DELTA PR/PRD, 33, 34, 35, 36 SERIES)

Sampling valves are made up of high quality AISI 304 or 316L raw material. They are designed for higher flow, easy sampling and effective cleaning after the sampling activity. Sampling valves can be equipped with steam connection for sterilization.

Sealing material: EPDM, HNBR, FDM, VMQ
Size: DN25 - 100 1” - 4”
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

SANITARY BALL VALVE (52, 53, 54, 55 SERIES)

Sanitary Ball valve is used process piping system for either isolation or diversion of the fluid, manually or automatically operated. A ball valve is constructed with a full bore or full port design with zero flow restriction making it a viscous or particulate liquid. Ball valves are available in different versions to suite its respective application.

Diaphragm material: EPDM/PTFE, FPM/PTFE, HNBR/PTFE, VMQ/PTFE
Size: DN25 - 125 1" - 4"
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

CHECK VALVE (DELTA RUF, VPN, 64, 65 SERIES)

The valve opens as soon as the pressure under the valve seat exceeds the counter pressure. When the pressure is balanced, the valve closes by spring action, which means that in case of a pressure increase, the valve closes on the spring side.

Sealing material: EPDM, HNBR, VMQ, FPM
Size: DN25 - 150 1” - 4”
Max. line pressure: 10 bar (145 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

VACUUM VALVES (DELTA VRA/VRAH)

In the brewing, beverage, dairy and food sector, vacuum valves APV VRA and APV VRAH are used to protect tanks and vessels against vacuum.

Sealing material: EPDM, FPM, VMQ
Size: DN25 - 150
Max. line pressure: 10 bar (145 psi)
Min. control air pressure: 6 bar (87 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

TANK VALVES (645 SERIES )

A lightweight seat-seal assembly with calibrated spring is enclosed in a special polymer bushing. The bushing is guided in a stainless steel housing. The Tank Vent is used as a breather valve to avoid vacuum or over pressurization inside a tank or piping system.

Sealing material: EPDM, FPM, VMQ
Size: DN40 - 100, 1,5" - 4"
Vacuum break: 0,007 bar (0,09 psi)
Opening from positive pressure: 0,07 bar (1 psi)
Sterilisation temperature: 135°C (284°F)
Valves
 

CONTROL UNIT (DELTA CU4; ETOP-2D, ETOP-2A)

The control unit is directly mounted onto the valve actuator. An inside solenoid valve switches the air supply to the actuator either on or off.

Sensors: Feedback for open/closed position
Temperature range: -20 - 70°C (-42 - 147°F)
Protection class: IP 67
Supply voltage: 24 - 48 V DC/24 V AC/110 V AC
Valves
 

LINE COMPONENTS (SIGHT GLASSES, FILTER & STRAINER)

Inline sight glasses are used in pipelines for visual observation of product flow. The food grade polycarbonate tube is as clear as glass and it is unbreakable under normal use. Optionally made of Borosilicate. Filters allow the removal of fine particles from various liquids. Stainless steel mesh can be reused after cleaning. All Seats and Seals are made from FDA approved materials

Sealing material: Sight Glasses: PTFE, VMQ; Filters: EPDM, HNBR, VMQ, FPM
Size: Sight Glasses & Filters: DN25 – 100, 1” – 4”
Max. line pressure: Sight Glasses: 10 bar; Filters: 8 bar
Max. temperature: Polycarbonate (Lexan): 100 °C (244°F), Borosilicate (Pyrex): 110 °C (244°F)
Valves
 

Fittings

 

● Complete fittings; ● Thread DIN11851; ● Clamp DIN 32676; ● Thread SMS 1145

Valves

Par Tapflo. Tapflo grupa ir neatkarīgs, ģimenes īpašumā esošs Eiropas ražotājs un globāls membrānu sūkņu, centrbēdzes sūkņu un citu rūpniecisko procesu iekārtu piegādātājs. Tapflo savas pārstāvniecības ir 30 valstīs un neatkarīgi izplatītāji vairāk nekā 45 valstīs.